0

Tractor Mounted Auger, Rotary and Core Drilling rig

Tractor Mounted Auger, Rotary and Core Drilling rig
Tractor Mounted Auger, Rotary and Core Drilling rig
Price And Quantity
  • Unit/Units
  • 1
  • Unit/Units
  • 0.50-
  • 000.5USD
Product Specifications
  • 0-100 RPM
  • new
  • ppr-30
  • No
  • Semi-Automatic
  • Normal
  • 2400 Volt (v)
  • pneumatic
  • 30 Meters Kg/hr
  • blue
    Product Description

    Specification

    Carrier

    Tractor 4 Wheel drive

    Make

    New Holland or any equivalent Make

    GVW

    6 Tones

    Engine Rating

    55 HP @ 2200 Rpm

    Prime Mover

    The same Tractor engine through suitable Power Take Off shall power the hydraulic system.

    Mounting Structure

    Electrically welded steel structure fitted to the Tractor body.

    Mast Assembly

    Sturdy structural channel structure for lower section and upper section with RHS tubular construction electrically welded. Mast will be provide with multi section. 6000mm 2000mm Feed & Hoist actuation by Hydraulic cylinder.

    Feed System

    Cylinder size

    70x40x2000

    Pull Back

    4600 Kgf

    Pull Down

    3000 Kgf

    Hoisting speed

    20m./ Minute


    up to 1.5 Mtr. Long.


    limit weight on bit, rapid and slow feed arrangement to suit


    variable ground condition.

    Rotary Head Output speed Out put torque

    Fabricated steel body 0-100 rpm 90 kg-m Rotary head will be provided with slide out arrangement.

    Hydraulics

    Open loop circuit with Fixed displacement pump and proportional valves for feed and rotation. Diverter valves for auxiliarydrives.

    Max operating pressure Hydraulic Tank capacity Filtration (Nom) Return line

    180 kg/cm2 100 Liters. 10/25 Microns Hydraulic oil cooler will be provided


    Control Panel

    All Necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenience

    Stabilizer Cylinder bore/ Stroke No. Of Jacks

    Hydraulically operated cylinders for rig leveling 100mm/610mm 3 Nos.

    Auxiliary Winch

    Hoisting capacity

    Wire rope length

    Hydraulically operated winch for Drill rod handling 1000 kgf 30m.

    Cetrifugal Pump Max. Flow Max. Pressure

    Hydraulically operated centrifugal pump is used for mud rotary drilling, 300 lpm 8bar

    SPT attachment (Optional)

    Hydraulically operated SPT attachment will be provided for Standard penetration test.

    Trade Information
    • CHENNAI
    • Telegraphic Transfer (T/T), Letter of Credit (L/C)
    • 5 Per Month
    • 3-4 Week
    • Contact us for information regarding our sample policy
    • stranded export packing
    • All India
    • ISO 9001:2008
      Contact Us

      203, 2nd Floor, OLBEE Center, Rajbhavan Road, Somajiguda Hyderabad Telangana India +918037400557
      Phone :+918037400557