Water Well Drilling Blast Hole

Water Well Drilling Blast Hole
Water Well Drilling Blast Hole
Price And Quantity
  • Unit/Units
  • 1
  • Unit/Units
  • 50000USD
    Product Specifications
    • 0-1000 RPM
    • 6Lx3Wx2.4H Meter (m)
    • high performance and highly duriable
    • PBHD-30
    • No
    • Semi-Automatic
    • Normal
    • 2400 Volt (v)
    • Pneumatic
    • 4 Tonne
    • 30 Meters m3/hr
    • Blue
      Product Description

      We are an acclaimed name engaged in offering our precious clients a superior quality range of Mineral and Quarry Drilling. This rig is manufactured using superior grade raw material and refined technology in harmonization with industrial standards. In instruct to make certain quality; the offered rig is scrupulously tested on certain parameters by our quality checkers. Keeping in mind the dissimilar requirements of our clients, we supply this rig in assorted sizes and specifications and at inexpensive prices.

      PRL Crawler Mounted Drill Rig Model PBHD-30 is primarily designed for Blast Hole applications. PRL PBHD-30 is among the best and most sought after Crawler mounted drilling rig in the market. It is intended for use in blast hole drilling for mining purpose. PRL PBHD-50 is designed for 250mm (10) diameter holes with a down the hole hammer. 

      Technical Specification 





      Model & Type

      PBHD-30, DTH Blast Hole Drilling Rig



      DTH Drilling

      4 inch (101 mm) up to max 50 meters depth.

      Drill hole Diameter

      4 inch(101 mm)

      Drill rod Diameter

      3 inch (76.2 mm)

      Drill rod Length

      3 meter (10 Feet)





      Crawler Capacity




      10 Tonnes


      Max. speed of equipment

      3.0 kmph

      Grad ability

      30 degree from horizontal.

      Grouser type


      Grouser width

      310/450 mm

      Ground pressure

      0.78 kg-f/sq.cm

      Type of Drive

      Independent Hydraulic Motor for each Track

      Drive system

      Through planetary gear box with in-built braking.

      Prime Mover

      The system shall be powered from diesel driven engine with the following capacity.

      Engine make

      Ashok Leyland or any other reputed make

      Rated capacity

      50 PS @ 1500 rpm or equivalent

      Mast Assembly

      Sturdy structural channel mast structure electrically welded.

      Mast overall length

      5000 mm

      Rotary head travel

      4000 mm

      Centralize opening

      6 inch (150 mm)

      Feed System

      Feed and hoist operation will be achieved by hydraulic motor with chain and sprocket arrangement.

      Pull Back

      2700 kg-f (30M/Minute)

      Pull Down

      3500 kg-f (62M/minute)

      Hoisting speed

      (UP) 35 meter/ minute

      Reeving Ratio


      Feed system consists of hold back arrangement to control limit weight on bit, rapid and slow feed arrangement to suit variable ground condition.


      Rotary Head Assembly


      (Top Head Drive)

      Fabricated steel body


      180 kg-m

      Rotation Speed

      Spindle rpm: 0-100



      Max operating pressure

      180 kg/cm2

      Hydraulic Tank capacity

      350 liters.

      Filtration (Nom) Return line

      10/25 microns

      Cooling: Fin type oil to air.


      Control Panel

      All Necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenience




      Model: Hydraulically operated regular type

      Cylinder bore diameter

      100 mm


      500 mm

      No. Of Jacks

      2 Nos.

      Boom Lifting, Swing, Tilting, Dumping, Rack Oscillation Cylinders

      For raising and lowering and swinging the Mast Assembly

      Water Injection Pump

      Hydraulically operated triplex water injection pump, for injecting water/foam with necessary piping and flow control valves

      Max. Flow

      30 liter/minute

      Max. Pressure


      Airline Lubricator





      450 cfm @ 150 psi

      Air compressor

      Two wheel trolley mounted Air Compressor.




      450 cfm @ 150 psi


      Trade Information
      • Mumbai/ Chennai
      • Letter of Credit (L/C), Telegraphic Transfer (T/T), Cash in Advance (CID)
      • 25 Per Month
      • 4 Week
      • Contact us for information regarding our sample policy
      • Standard Exports & Packing
      • Asia, Australia, Middle East, Africa
      • All India
      • ISO 9001:2008
      Related Products
      Used Water Well Drilling Rig

      Send Inquiry
      Drilling rig high efficiency water well drilling rig

      Send Inquiry
      13 3/4

      Send Inquiry
      Pole Holel Auger Drilling Rig

      Send Inquiry
      5 7/8 Tricone Rock Roller Bit

      Send Inquiry
      450mm Pilling Bit

      Send Inquiry
      right arrow
      left arrow
      Contact Us

      H.no. 6-3-907 To 912, Fourth Floor, Challa Chambers, Kapadia Lane Junction, Raj Bhavan Road, Somajiguda,  Hyderabad  Telangana  India  +918037400557
      Phone :+918037400557